Call Park Retrieve - K-Ccis - NEC Univerge SV9100 Manual

F
EATURE
This feature allows a station user to retrieve Parked Calls at remote sites across
K-CCIS. Locally parked calls can be retrieved from a remote system, connected via
K-CCIS, by dialing the Call Park Hold Group Number, plus the park orbit location.
S
YSTEM
Terminal Type:
All Terminals
Required Components:
GCD-CCTA
GPZ-IPLE
O
PERATING
Retrieve Park Call at remote location:
1.
2.
3.
S
ERVICE
General:



4-28
D
ESCRIPTION
A
VAILABILITY
- OR -
P
ROCEDURES
Go off-hook, and wait for internal dial tone.
Dial the Call Park Retrieve Access Code *6 (default) + Park Hold Group
Number (1~64) + Park Orbit Number (1~64) of the call to be retrieved. Call
Park Retrieve access codes cannot be the same at all locations in the K-
CCIS Network.
Talk with party.
C
ONDITIONS
A different Call Park Retrieve Access Code must be programmed for each
system in the K-CCIS network.
The Park Group Number and Park Orbit Number must be dialed immediately
following the Park Retrieve Service Code.
When two or more stations attempt to retrieve the parked call, only one station
can retrieve the call.
Call Park Retrieve – K-CCIS
Features and Specifications
Issue 2.0