NEC Univerge SV9100 Manual page 154

Issue 2.0
R
ELATED

G
UIDE TO
This guide provides a list of associated Programs that support this feature.
Program/
Description/Selection
Item No.
11-16-03 Single Digit Service code
Setup – Switching of Voice/
Signal Call
11-12-06 Service Code Setup (for
Service Access) –
Switching of Voice Call and
Signal Call
20-08-10 Class of Service Options
(Outgoing Call service) –
Signal/Voice Call
20-08-11 Class of Service Options
(Outgoing Call service) –
Protect for the Call Mode
Switching from Caller
(Internal Call)
SV9100 Networking Manual
F L
EATURE IST
Voice Calls – K-CCIS
F P
EATURE ROGRAMMING
Assigned Data
Default is 1
Default is 712
0 = Off
1 = On
Default is 1
0 = Off
1 = On
Default is 0
Comments
Customize the one-digit Service Code used when a
busy or ring back signal is heard.
Toggle an ICM call between Handsfree
Answerback or Forced Intercom Ringing for
outgoing Intercom Calls.
Turn Off or On the ability to force Handsfree
Answerback or Forced Intercom Ringing for
outgoing Intercom Call on/off.
When extension is set for ICM calls, enable this
option to prevent callers from changing to voice
announce mode.
4-75