Local Numbering Plan Assignment; Closed Numbering Plan - Using Closed Number Blocks; Table 5-9 Local Numbering Plan Assignments; Table 5-10 Closed Numbering Plan Assignments - NEC Univerge SV9100 Manual

Issue 2.0
2.3
Program/
Item No.
11-01-01
11-02-01
11-04-01
2.4
Program/
Item No.
11-01-01
44-02-01
44-02-02
SV9100 Networking Manual

Local Numbering Plan Assignment

Use these programs to assign system, extension and virtual extension numbering
for the Local Numbering Plan.

Table 5-9 Local Numbering Plan Assignments

Description/Selection
System Numbering
Extension Numbering
Virtual Extension
Numbering
Closed Numbering Plan – Using Closed Number Blocks
Use these programs to assign system numbering and ARS/F-Route dialed digits
for a Closed Numbering Plan.

Table 5-10 Closed Numbering Plan Assignments

Description/Selection
System Numbering
Dial Analysis Table for
ARS/F-Route Access –
Dial
Number of digits to be
analyzed by the system
Dial Analysis Table for
ARS/F-Route Access –
Service Type
Assigned Data
0 = Not Used
1 = Service Code
2 = Extension Number
3 = Trunk Access
4 = Special Trunk Access
5 = Operator Access
6 = Flexible Routing
7 = Not Used
8 = Networking System
Access
9 = Dial Extension Analyze
Assign Station Numbers to
Port Numbers
Assign Station Numbers to
Port Numbers
Assigned Data
2 = Extension Number
Up to 8 digits can be assigned.
Use line key 1 for Don't Care
digit, @
Default is No Setting
2 = ARS/F-Route Table
(F-Route)
Default is No Setting
Comments
Defaults for 1X, 2X, 3X = 2
Extension Number.
Defaults for Ports
Port 1 ~ 99 = 101 ~ 199
Port 100 ~ 960 = 3101 ~ 3961
Defaults for Ports
Ports 1 ~ 99 = 201 ~ 299
Ports 100 ~ 512 = No setting
Comments
Defaults for 1X, 2X, 3X = 2
Extension Number.
Assign the digits to be dialed
across the K-CCIS link. These
digits were assigned as
F-Route in Program 11-01-01.
The service type 2 assigns the
digits to be dialed to an
F-Route.
Program 44-02-03 assigns the
F-Route to be used.
5-23