NEC Univerge SV9100 Manual page 356

Program
Program Name/Description
Number
10-28-05 SIP System Information Setup – Domain
Assignment
Define the Domain Assignment. This entry is
determined by what information the SIP carrier
provides. If the SIP carrier provides a server
name: SIPconnect-sca@L0.cbeyond.net, then
the domain is: L0.cbeyond.net and the host
name is SIPconnect-sca.
10-28-06 SIP System Information Setup – IP Trunk
Port Binding
Enable/Disable IP Trunk Port binding.
10-29-01 SIP Server Information Setup – Default
Proxy (Outbound)
Define the SIP Proxy setup, Default Proxy
(Outbound). When SIP trunking is used, this
must be on.

If entries are made in Program 10-29-xx for an
SIP Server and the SIP Server is removed or not
used, the entries in Program 10-29-xx must be set
back to their default settings. Even if Program
10-29-01 is set to 0 (off), the UNIVERGE SV9100
still checks the settings in the remaining 10-29
programs.
10-29-02 SIP Server Information Setup – Default
Proxy (Inbound)
Define the Default Proxy (Inbound).
10-29-03 SIP Server Information Setup – Default
Proxy IP Address
Enter the default Proxy IP Address if the SIP
carrier is using an IP address for the proxy. In
most cases, this is left at the default entry as
the domain name is used.
10-29-04 SIP Server Information Setup – Default
Proxy Port Number
Define the Proxy Port Number.
10-29-05 SIP Server Information Setup – Registrar
Mode
This program is used to Enable/Disable the
ability to Register to the ITSP.

In Registration mode (IP or Domain Name)
this MUST be enabled.
6-10
Input Data
0 = IP Address
1 = Domain Name
(Profile 1 ~ Profile 2)
0 = Disable
1 = Enable
(Profile 1 ~ Profile 2)
0 = Off
1 = On
(Profile 1 ~ Profile 2)
0 = Off
1 = On
(Profile 1 ~ Profile 2)
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
(Profile 1 ~ Profile 2)
0 ~ 65535
(Profile 1 ~ Profile 2)
0 = None
1 = Manual
(Profile 1 ~ Profile 2)
Issue 2.0
Level
Default
1 2 3
0

0

0

0

0.0.0.0

5060

0

SIP Trunking