NEC Univerge SV9100 Manual page 108

Hide thumbs Also See for Univerge SV9100:

Table of Contents

Restrictions:

SV9100 Networking Manual

A station connected to a PBX can retrieve a parked call in an UNIVERGE

SV9100, but the station connected to the UNIVERGE SV9100 system cannot

retrieve a parked call in a PBX.

A Park Hold key cannot be used to retrieve a parked call from a distant system.

F-Routes are required to route Call Park Retrieve Access Code to proper

system in the K-CCIS network.

When a remote location retrieves a call from another location, the call is treated

as if it were transferred from the distant location.

SMDR reports the retrieved call from the distant location as if it were a

transferred call.

When a call that has Caller ID Information is retrieved at the distant location the

Caller ID information is treated as if it were a transferred call.

Link Reconnect operates when the trunk is retrieved back to the origination

A Call cannot be placed into remote systems Call Park Location.

Call Park Retrieve – K-CCIS is only a Key System-to-Key System supported

) cannot be used in conjunction with IP K-CCIS.

When the UNIVERGE SV9100 is connected to the Electra Elite IPK II, the

maximum digits assignment in the UNIVERGE SV9100 is determined by

Program 44-05-09.

Call Park Searching is supported in the local system only.

Call Park – System