Ip Extension Numbering - NEC Univerge SV9100 Manual

Issue 2.0
Program
Program Name
Number
System Numbering
11-01-01
Extension Numbering
11-02-01
Program
Program Name
Number
SIP Extension CODEC
Information Basic Setup –
Number of G.711 Audio
84-19-01 Frames
SIP Extension CODEC
Information Basic Setup –
84-19-02
G.711 Voice Activity
Detection Mode
SIP Extension CODEC
Information Basic Setup –
84-19-03
G.711 Type
SIP Extension CODEC
Information Basic Setup –
84-19-04
G.711 Jitter Buffer (min)
SIP Extension CODEC
Information Basic Setup –
84-19-05
G.711 Jitter Buffer
(Average)
SV9100 Networking Manual
5.1.4

IP Extension Numbering

Use these programs to assign IP extension numbering.
Description/
Comments
Refer to the SV9100
Programming Manual
for all options and
default settings.
Assign up to eight digits
for extension numbering
5.1.5 SIP Extension CODEC Information
Use these programs assign SIP extension CODEC information.
Description/
Comments
Define the G.711 audio
Frame Size
Enable/Disable Voice
Activity Detection for
G.711.
Define the G.711 Type –
-law is recommended
in USA.
Define G.711 Jitter
Buffer minimum
accepted value.
Define G.711 Jitter
Buffer setting.
Assigned Data
1 = 3 Digit; Intercom
Default is 3 Digit; Intercom
Dial (Up to eight digits)
Default
Ports 1~300 = 200~499
Ports 301~960 =
5000~5659
Assigned Data
1~4
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
Default is 2
0 = Disable
1 = Enable
Default is 0
0 = A-law
1 = -law
Default is 0
0~300ms
Default is 20
0~300ms
Default is 40
1 2 3
X
X
1 2 3
9-15