NEC Univerge SV9100 Manual page 145

Restrictions:

Refer to the Key-Common Channel Interoffice Signaling (K-CCIS) feature for more
details related to Single Line Telephone and IP (K-CCIS) support.
R
ELATED



G
UIDE TO
This guide provides a list of associated Programs that support this feature.
Program/
Description/Selection
Item No.
22-09-01 DID Basic data Setup –
Expected Number of Digits
22-10-01 DID Translation Table Setup
– Conversion Table Area
Number
22-11-01 DID Translation Number
Conversion – Received
Number
22-11-02 DID Translation Number
Conversion – Target
Number
22-11-03 DID Translation Number
Conversion – DID Name
4-66
Program 20-02-15 (Caller ID Display Mode) must be set to 0 to display the DID
Name on incoming
DID
F L
EATURE IST
Key-Common Channel Interoffice Signaling (K-CCIS)
Flexible Numbering of Stations – K-CCIS
Uniform Numbering Plan – K-CCIS
F P
EATURE ROGRAMMING
Assigned Data
1~8
Default is 4
0 = No setting
1~2000
Default is 0
Maximum eight digits
Default is No Setting
Maximum 24 digits
Default is No Setting.
Maximum 12 digits
Default is No Setting
calls.
Assign number of digits the Table expects to
receive from Telco. Use this program to make the
system compatible with three- and four- digit DID
service.
Program the Translation Table size.
Assign the received number to the Conversion
Table number.
Assign the destination extension based on the
digits received.
Assign the DID Name based on the digits received.
Issue 2.0
Comments
Features and Specifications