NEC Univerge SV9100 Manual page 554

Issue 2.0
Level:
IN
Description
Use Program 51-05 : NetLink Timer Settings to set the various timers within the
NetLink system.
Item
No.
01
02
03
04
05
06
07
Feature Cross Reference
None
SV9100 Networking Manual
Item
Keep Alive Sending Interval
This is the Keep Alive timer sending time from
the Secondary system to confirm
communication with the Primary system.
Keep Alive Response Waiting Time
This is the time the Secondary system waits for
a response from the Primary system before
cutting off communication.
Primary Search Packet Sending Interval
While searching the Primary system, the system
sends a packet at this interval.
Primary Search Time Maximum Value
Total time of Primary system seek time.
Top Priority Primary Detection Packet
Sending Interval
When current Primary system is not Top Priority
Primary System, the system sends packet to
check if Top Priority System exists.
Primary Compulsion Specification Trial
Maximum Time
When the forced change Primary command is
executed, the system searches the new Primary
system for this time.
Socket Refresh Time
For some reason, the IP connection may
become unstable. Then keep-alive function
does not work. To avoid this, if there is no data
traffic for this time, the socket is refreshed.
Conditions
None
Program 51 : NetLink Service
51-05 : NetLink Timer Settings
Input Data
1~3600
0, 5~10800
(0 = infinity)
1~3600
5~10800
1~3600
1~10800
20~3600
Default
5
0
5
20
10
30
40
10-67