NEC Univerge SV9100 Manual page 711

Level:
IN
Description
Use Program 16-01 : Department Group Basic Data Setup to set the function mode for each
department group. There are 64 available Department Groups.
Input Data
Department Group Number
Item
No.
01
Department Name
02
Department Calling Cycle
Use this option to set the call
routing for Department Calling.
Routing can be either circular
(cycles to all phones in group)
or priority (cycles to highest
priority extensions first).
03 Department Routing when
Busy (Auto Step Call)
Use this option to set how the
system routes an Intercom call
to a busy Department Group
member. Intercom callers to the
extension can either hear busy
or route to the first available
department number. This only
occurs for calls to the extension
directly, not the department
number assigned in Program
11-07.
04 Hunting Mode
Use this option to set the action
taken when a call reaches the
last extension in the Department
Group (0=hunting stopped,
1 =hunting repeats with circular
routing through the Department
Group).
13-116
Program 16 : Department Group Setup
16-01 : Department Group Basic Data Setup
Item
1~64
Input Data
Maximum 12 characters
0 =Normal Routing
(Priority)
1 =Easy – UCD
Routing (Circular)
0 =Normal (Intercom
caller to busy
department
member hears
busy)
1 =Circular (Intercom
callers to busy
department
member routes to
idle member)
0 =Last extension is
called and hunting
is stopped
1 =Circular
Related
Default Progra
m
No 11-07
setting
0 16-02
0 16-02
0
Issue 2.0
AspireNet