NEC Univerge SV9100 Manual page 175

Program/
Description/Selection
Item No.
44-05-01 ARS/F-Route Table – Trunk
Group Number
44-05-02 ARS/F-Route Table –
Delete digits
44-05-03 ARS/F-Route Table –
Additional Dial Number
Table
44-05-09 ARS/F-Route Table –
Maximum Digit
4-96
Assigned Data
0 = Not Set Select trunk group number used for outgoing ARS
1 ~ 100 = Trunk Group calls.
from 14-05 Setting 255 = Internal Extension Call.
101 ~ 150 Networking
255 = Extension Call
Default is 0
0 = No setting Enter number of digits to delete from the dialed
0~255 number.
255 = Delete All Digits
Default is 0
0= No Setting Enter Table Number (defined in PRG 44-06) for
0~1000 additional digits to dial.
Default is 0
0 = No Maximum Assign max digits for the Paging Access Code.
0~24
Default is 0
Issue 2.0
Comments
Features and Specifications