NEC Univerge SV9100 Manual page 168

Issue 2.0
To cancel for any station for Attendant Positions only:
1.
2.
3.
4.
5.
S
ERVICE
General:








SV9100 Networking Manual
Pick up the handset or press Speaker.
Dial the Call Forward Busy/No Answer for any Extension to Destination
Service Code (default: 793).
Dial 0 (Cancel).
Dial the station number, which is forwarded.
Press Speaker or hang up.
C
ONDITIONS
Multiple Call Forwarding – Busy/No Answer Calls - K-CCIS can forward a call
up to seven times across K-CCIS links (up to seven hops) depending on
systems data.
Multiple Call Forwarding over a K-CCIS link is combined with Multiple Call
Forwarding – All Calls/Busy/No Answer.
If the calling station is set as the destination in a multiple hop scenario, Multiple
Call Forwarding – Busy/No Answer Calls - K-CCIS are not performed, i.e., an
infinite loop does not occur.
For multiple Call Forwarding – All/Busy (Immediate) calls, the display on the
calling party's Multiline Telephone indicates the terminating station user's name
and the station number for the first station of a distant system in the Multiple
Call Forwarding group. For the terminating station, the telephone display
indicates the name and the number of the calling party and the trunk number of
the incoming call.
For multiple Call Forwarding – No Answer/Busy (Delay) calls, the display on the
calling party's Multiline Telephone indicates the name and number of the first
station of a distant systems in the Multiple Call Forwarding group. For the
terminating station, the telephone display indicates the name and the number
of the calling party and the trunk number of the incoming call.
When a calling station has been Call Forwarding – Busy/No Answer Calls –
K-CCIS to the maximum times assigned in Program 50-05-01 (K-CCIS
Maximum Call Forwarding Hop Assignment) and encounters another Call
Forwarding – Busy/No Answer Calls – K-CCIS condition, the calling station is
not forwarded and rings at the last destination.
When the destination station in a Multiple Call Forwarding – Busy/No Answer
Calls – K-CCIS situation is busy and has not set Call Forwarding – Busy and
has Call Alert Notification disabled, the calling party receives busy tone.
When combining Call Forwarding – Busy and Call Forwarding – All Calls –
K-CCIS and the destination station is busy and has Call Alert Notification
disabled, the calling party hears a busy tone after the maximum hops assigned
4-89