NEC Univerge SV9100 Manual page 550

Issue 2.0
Level:
IN
Description
Use Program 51-02 : NetLink System Individual Setting to set system data for
each NetLink system.
NOTE
Input Data
Item
No.
01
02
03
04
SV9100 Networking Manual
51-02 : NetLink System Individual Setting
Program 51-02-03 is not used in US, but is used in other countries.
System ID
Item
System Name
This name is given to each system.
Time Zone (Hour)
Determine the time offset from the Primary
system.
(0 = -12, 1 = -11, 2 = -10.... 12 = 0
13 = +1, 14 = +2, 24 = +12)
This setting affects Time Display on MLT
(see Program 51-13-02).
Time Zone (Minute)
Determine the time offset from the Primary
system.
(0 = -60, 1 = -59, 2 = -58.... 120 = +60)
This setting affects Time Display on MLT
(see Program 51-13-02).
This program is not used in the US, but is
used in other countries.
Authenticate System MAC Address
To use this function, set Program 51-13-03
to 1 (enable), NetLink systems reject the
connection from unauthenticated system
access.
Program 51 : NetLink Service
Input Data
Up to 20 characters.
0~24
0~120
00-00-00-00-00-00~
FF-FF-FF-FF-FF-FF
1~50
Default
blank
12
60
00-00-00-00-00-00
10-63