Copy Settings
Combination of Copy Settings
You can combine and use various copy settings.
This applies to Mode Memory registration and default value settings (→P. 3-14) as well.
However, the following limitation is found in the setting combination.
<No. of Copies>
<Density>
<Original Type> -
<2-Sided>
(MF8380Cdw
Only)
<Copy Ratio>
<Paper>
<4 on 1>/
<2 on 1>
<ID Card Copy>
<Collate>
<Erase Frame>
<Sharpness>
Selecting Copy Papers
Copy mode screen
Copy: Press Start
100%
Density: 0
Original Type: Text
2-Sided: Off
3-4
-
-
• Depending on its paper size or paper type in the selected paper source, 2-sided copy is not available.
"Supported Paper Types" (→P.2-6)
• This feature cannot be combined with <ID Card Copy>.
• When you want to copy documents in a reduction ratio different from its default value for <4 on 1>/<2 on 1>, specify
the <Copy Ratio> later.
• <Copy Ratio> is fixed at 100 % for <ID Card Copy>.
• The frame width specified at <Erase Frame> increases/decreases according to the <Copy Ratio> setting.
Depending on its document size (selected paper source), 2-sided copy is not available.
• If you want to copy a document in a copy ratio different from its default reduction ratio, specify the <Copy Ratio> later.
• This feature cannot be combined with <Erase Frame>.
• <Copy Ratio> is fixed at 100%.
• This feature cannot be combined with either 2-Sided Copy or <Erase Frame>.
-
• This feature cannot be combined with N on 1 (<4 on 1>/<2 on 1>, <ID Card Copy>).
• The specified erase frame width increases/decreases according to the <Copy Ratio> setting.
-
1
Select Paper/
LTR
1
Settings
+ -
...
Setting screen*
Select Paper
LTR:Plain
LTR:Plain
1
Paper Settings
Select the paper source using [
* You can display the setting
screen also by selecting
<Paper> in the copy mode
screen.
] → [OK]
] or [