Chapter 8
[1]
3) Disconnect the 2 connectors [1], and remove the 2 screws [2]; then,
detach the connector base [3].
[3]
4) Remove the 2 screws [1], and detach the waste toner bottle holder [2].
Take care not to spill the waste toner.
[1]
[2]
8-70
[2]
[3]
[1]
F-8-214
[1]
[2]
F-8-215
[1]
F-8-216
8.10.24.6 Removing the Vertical Path Lower Motor
1) Disconnect the connector [2], remove the 3 screws [1], and detach the
vertical path lower motor [3].
[3]
[1]
8.10.25 Fixing Feeding Unit Releasing Lever Sensor
8.10.25.1 Removing the Fixing Feed Unit
1) Open the front cover [1].
2) Turn the fixing feed unit releasing lever [1] counterclockwise to
release the lock; then, hold the lever [1], and slide out the fixing feed
unit [2] toward the front until it stops. (At this time, the duplexing
feed unit will also slide out.)
0009-3919
[2]
F-8-217
0009-5157
[1]
F-8-218