Cleaning The Developing Anti-Stray Sheet; Developing Cylinder; Removing The Developing Assembly - Canon iR6570 series Service Manual

Chapter 7
2) Remove the mounting screw [1], and push the developing locking
assembly [2] in the direction of the arrow to detach.
[1]
3) Disconnect the connector [1], and take the developing assembly [2]
out of the machine slowly.
[1]

7.10.12.2 Cleaning the Developing Anti-Stray Sheet

1) Remove the developing assembly, and clean the developing anti-stray
sheet [1].
[1]
7-50
[2] [1]
F-7-164
[2]
F-7-165
[2]
F-7-166
0009-5667
F-7-167

7.10.13 Developing Cylinder

7.10.13.1 Removing the Developing Assembly

The machine's developing assembly is not equipped with a cover to
protect the developing cylinder.
If you must remove the developing assembly, be sure to exer-cise care
not to damage the developing cylinder.
When the developing assembly is outside the machine, be sure not to
mount the developing assembly locking assembly. The toner collecting
in the path from the hopper to the developing assembly can start to move
astray because of the vibration occurring during inspection or repair
work.
1) Open the manual feed tray cover [1], remove the screw [2] from the
door tape, and fully open the manual feed tray cover [1].
2) Remove the mounting screw [1], and push the developing locking
assembly [2] in the direction of the arrow to detach.
[1]
3) Disconnect the connector [1], and take the developing assembly [2]
out of the machine slowly.
[1]
0009-5623
[2] [1]
F-7-168
[2]
F-7-169
[2]
F-7-170