Servicing Front Final Drive; Removing And Installing Flange Shaft (Left-Side); Protected By Copyright. Copying For Private Or Commercial Purposes, In Part Or In Whole, Is Not - Audi A8 2003 Workshop Manual

2

Servicing front final drive

2.1

Removing and installing flange shaft (left-side)

Special tools and workshop
equipment required
♦ Drift -VW 295-
♦ Puller -T10037-
♦ Used oil collection and ex‐
traction unit -V.A.G 1782-

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not

permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Removing
• Gearbox installed
– If applicable, activate jacking mode when raising the vehicle
⇒ Running gear, front-wheel drive and four-wheel drive; Rep.
Gr. 43 ; Adaptive air suspension .
– Raise vehicle or drive onto inspection pit.
– Remove front left wheel.
Note
Secure brake disc with wheel bolts.
multitronic 01J, front-wheel drive - Edition 11.2007
Audi A8 2003 ➤
2. Servicing front final drive
99