Download Print this page

Fuji Xerox DocuPrint P268 d Quick Setup Manual

Advertisement

Quick Links

DocuPrint P268 d / DocuPrint P268 dw
ME7184E3-1 (Edition 1)
Quick Setup Guide
October 2014
Copyright © 2014 by Fuji Xerox Co., Ltd.
Fuji Xerox Co., Ltd.
Unpack the machine and check the components
A
Drum Unit
(Pre-installed)
B
Inbox Toner Cartridge
1
Remove the packing materials and install the toner cartridge
2
Load paper in the paper tray
3
Connect the power cord and turn on the machine
USB Interface Cable
Quick Setup Guide
CD‑ROM
Remove the orange part.
Adjust the paper guides.
Read the Safety Guide first, then read this Quick Setup Guide for the correct installation
procedure.
NOTE:
The USB cable is a standard accessory.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network.
Safety Guide
B
A
Remove the orange part.
Insert the paper with the print side face-up.
B
A
B
A

Advertisement

loading

Summary of Contents for Fuji Xerox DocuPrint P268 d

  • Page 1 DocuPrint P268 d / DocuPrint P268 dw ME7184E3-1 (Edition 1) Quick Setup Guide October 2014 Copyright © 2014 by Fuji Xerox Co., Ltd. Fuji Xerox Co., Ltd. Unpack the machine and check the components Read the Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
  • Page 2 CD-ROM drive or Macintosh) ® Download the full driver and software package by visiting the Fuji Xerox website at http://www.fujixeroxprinters.com/. After you download the driver and software package, follow the on-screen instructions until the Connection Type screen appears. Refer to...

This manual is also suitable for:

Docuprint p268 dw