Fuel Filler Cap Inspection; Fuel Tank Inlet Valve Removal And Installation - Suzuki Grand Vitara Service Manual

1G-16 Fuel System:

Fuel Filler Cap Inspection

WARNING
!
Before starting the following procedure, be
sure to observe "Precautions on Fuel System
Service: " in order to reduce the risk or fire
and personal injury.
Remove cap (1), and check gasket for even filler neck
imprint, and deterioration or any damage. If gasket (2) is
in malcondition, replace cap.
NOTE
If cap requires replacement, only a cap with
the same features should be used. Failure to
use correct cap can result in fire and
personal injury.

Fuel Tank Inlet Valve Removal and Installation

WARNING
!
Before starting the following procedure, be
sure to observe "Precautions on Fuel System
Service: " in order to reduce the risk or fire
and personal injury.
Removal
1) Remove fuel filler cap.
2) Insert hose of a hand operated pump into fuel filler
hose (1) and drain fuel in space "A" as shown in
figure.
CAUTION
!
Do not force pump hose into fuel tank, or
pump hose may damage to fuel tank inlet
valve (2).
www.CarGarage.ir
3) Hoist vehicle, and remove clamp (2) and fuel filler
S5JB0A1706011 hose (1) from fuel filler neck.
4) Remove fuel tank inlet valve (1) using flat head rod
(2) or the like.
CAUTION
!
Be careful not to damage fuel tank inlet valve
(1) with flat head rod (2) or the like.
I2RH01170008-01
S5JB0A1706015
Installation
1) Install fuel tank inlet valve (1) to fuel tank.
2) Install fuel filler hose (1) to fuel tank and secure it
with clamp (2).
For proper installation, refer to "Fuel Hose
Disconnecting and Reconnecting: ".
IYSQ01170010-01
3) Lower vehicle and install fuel filler cap.
www.CarGarage.ir
2 1
2 1
I5JB0A171014-01
I2RH0B170017-01
I2RH0B170018-01
I5JB0A171014-01