Stopping Cc-Sg Management - Raritan dominion kx III Administrator's Manual

Stopping CC-SG Management

While KX III is under CC-SG management, if you try to access the device
directly, you are notified that the device is under CC-SG management.
If you are managing KX III through CC-SG and connectivity between
CC-SG and the KX III is lost after the specified timeout interval (typically
10 minutes), you are able to end the CC-SG management session from
the KX III console.
Note: You must have the appropriate permissions to end CC-SG
management of KX III.
1. Click Maintenance > Stop CC-SG Management. A message
indicating that the device is being managed by CC-SG will be
displayed. An option to remove the device from CC-SG management
will also be displayed.
2. Click Yes to begin the process of removing the device from CC-SG
management. A confirmation message displays.
3. Click Yes to remove the device CC-SG management. A confirmation
message displays when CC-SG management has ended.
Chapter 4: KX III Administration
221