Step 3: Add Kx Iii Kvm Switches (Without Cc-Sg Integration) - Raritan Dominion KX III User Manual

Chapter 2: Getting Started
14
Note: It is strongly recommended to change the factory default password.
If the default password has not been changed, you will see a reminder
message in the User Station Configuration and Navigator windows. See
(on page 108).
Change Password

Step 3: Add KX III KVM Switches (without CC-SG integration)

If you are not integrating your User Station with CC-SG, proceed with this
step. If you want to integrate CC-SG, see
CommandCenter Secure Gateway (CC-SG) Integration
"
If the User Station is connected to a non-DHCP network, you must
manually configure the network settings prior to adding KX III KVM
Basic Network Settings
switches. See
When you are not using CC-SG integration, KX III KVM switches are
added in the User Station Configuration window.
To add KX III KVM switches:
1. Launch the User Station Configuration window using either method
below.
Ctrl+Alt+C
Press

Choose Main Menu > User Station Configuration. For the Main

Menu's location, see
9).
2. Click New.
3. Enter the data for the KX III KVM switch.
CC-SG Integration
(on page 21).
.
Main Screen and Main Toolbar
(see
" on page 134).
(on page