Raritan dominion kx III Administrator's Manual page 148

Chapter 4: KX III Administration
Blade chassis
Generic
®
Cisco UCS Server
Chassis
® ™
Dell PowerEdge
1855
Dell PowerEdge
1955
Dell PowerEdge
M1000e
136
Connection method
If a D2CIM-VUSB or D2CIM-DVUSB is used
when connecting to a blade-chassis configured
as Generic, you will be able to select the USB
profiles from the Port Configuration page and
the client's USB Profile menu. However, virtual
media is not supported for generic blade
chassis and the Virtual Media menu is disabled
on the client.
The Cisco KVM cable (N20-BKVM) enables
you to perform server blade administration,
configuration, and diagnostic procedures by
connecting video and USB devices directly to
the server blade.
Source: Cisco UCS 5108 Server Chassis
Installation Guide
Includes one of the three KVM modules :

Analog KVM Ethernet switch module
(standard)

Digital Access KVM switch module
(optional)

KVM switch module (standard on systems
sold prior to April, 2005)
These switches provide a custom connector
that allows two PS/2 and one video device to
be connected to the system.
Source: Dell PowerEdge 1855 User Guide
One of two types of KVM modules may be
installed:

Analog KVM switch module

Digital Access KVM switch module
Both modules enable you to connect a
PS/2-compatible keyboard, mouse and video
monitor to the system (using a custom cable
provided with the system).
Source: Dell PowerEdge 1955 Owner's Manual
The KVM Switch Module (iKVM) is Integrated
with this chassis.
The iKVM is compatible with the following
peripherals:

USB keyboards, USB pointing devices
Recommended CIM(s)

DCIM-PS2

DCIM-USBG2

DCIM-USBG2

D2CIM-VUSB

D2CIM-DVUSB

DCIM-PS2

DCIM-PS2

DCIM-USBG2