Prerequisites For Using Virtual Media - Raritan dominion kx III Administrator's Manual

Chapter 5: Virtual Media

Prerequisites for Using Virtual Media

258
KX III Virtual Media Prerequisites

For users requiring access to virtual media, the KX III permissions
must be set to allow access to the relevant ports, as well as virtual
media access (VM Access port permission) for those ports. Port
permissions are set at the group-level.

A USB connection must exist between the device and the target
server.

If you want to use PC-Share, Security Settings must also be enabled
in the Security Settings page. Optional

You must choose the correct USB profile for the KVM target server
you are connecting to.
Remote PC VM Prerequisites

Certain virtual media options require administrative privileges on the
remote PC (for example, drive redirection of complete drives).
Note: If you are using Microsoft Vista or Windows 7, disable User
Account Control or select Run as Administrator when starting
Internet Explorer. To do this, click the Start Menu, locate IE,
right-click and select Run as Administrator.
Target Server VM Prerequisites

KVM target servers must support USB connected drives.

USB 2.0 ports are faster and preferred.
CIMs Required for Virtual Media
You must use one of the following CIMs is to use virtual media:

D2CIM-VUSB

D2CIM-DVUSB

D2CIM-DVUSB-DVI

D2CIM-DVUSB-HDMI

D2CIM-DVUSB-DP
The black USB connector on the DVUSB CIMs are used for the
keyboard and mouse. The gray connector is used for virtual media.
Keep both USB plugs of the CIM connected to the device.
The device may not operate properly if both plugs are not connected to
the target server.