Turning Outlets On/Off And Cycling Power - Raritan dominion kx III Administrator's Manual


Association - The ports associated with the outlet
If you have privileges, you can also control power from AKC, VKC, VKCs,
and the Admin client. See
KVM Client (VKC) or Active KVM Client (AKC)
Using VKC, VKCS, and

Turning Outlets On/Off and Cycling Power

To turn an outlet on:
1. Click the Power menu to access the Powerstrip page.
2. From the Powerstrip drop-down, select the PX rack PDU (power strip)
you want to turn on.
3. Click Refresh to view the power controls.
4. Click On next to the outlet you want to power on.
5. Click OK to close the Power On confirmation dialog. The outlet will
be turned on and its state will be displayed as 'on'.
To turn an outlet off:
1. Click Off next to the outlet you want to power off.
2. Click OK on the Power Off dialog.
3. Click OK on the Power Off confirmation dialog. The outlet will be
turned off and its state will be displayed as 'off'.
Chapter 4: KX III Administration
Remote Power Management via Virtual
(see
AKC" on page 314)
"Power Control
55