Raritan dominion kx III Administrator's Manual page 143

a. Active - To activate the link once it is configured, select the
Active checkbox. Leave the checkbox deselected to keep the
link inactive. Entering information into the link fields and saving
can still be done even if Active is not selected. Once Active is
selected, the URL field is required. The username, password,
username field and password field are optional depending on
whether single sign-on is desired or not.
b. URL - Enter the URL to the interface. See
Sample URL Formats
for the IBM BladeCenter.
c. Username - Enter the username used to access the interface.
d. Password - Enter the password used to access the interface.
Note: Leave the username and password fields blank for DRAC, ILO,
and RSA web applications or the connection will fail.
e. The Username Field and Password Field, which are both
optional, contain the labels that are expected to be associated
with the username and password entries.
Enter the field names for the username and password fields used
on web application's login page. For example, the web
application's login page may use fields named "userID" and
"userpassword".
You can view the HTML source of the login screen in your
browser to find the field names. Note that these are not the field
labels.
f. See Tips for Adding a Web Browser Interface
for tips on adding a web browser interface.
5. USB profiles are not used by IBM (Other) configurations.
6. In the Target Settings section, select 720x400 Compensation if you
are experiencing display issues when the target is using this
resolution.
7. Select 'Use international keyboard for scan code set 3' if connecting
to the target with a DCIM-PS2 and require the use of scan code set 3
with an international keyboard.
Select the CIMs native, display resolution from the Display Native
Resolution drop-down. This is the preferred resolution and timing mode
of the digital CIM. Once a resolution is selected, it is applied to the CIM.
1. If no selection is made, the default 1024x1280@60Hz resolution is
used.
2. Click OK to save the configuration.
Chapter 4: KX III Administration
Blade Chassis
(on page 140) for sample configurations
(on page 132)
131