Connecting The Paragon Ii To The Kx Iii - Raritan dominion kx III Administrator's Manual

Appendix B: Accessing a Paragon II from the KX III

Connecting the Paragon II to the KX III

364
To connect the Paragon II system to a KX III:
1. Check whether the Paragon II user station that you want to connect
to the KX III is implemented with version 4.6 firmware (or later). If not,
upgrade it.
The Paragon II user station can be one of these:

P2-UST

P2-EUST

P2-EUST/C
See Paragon II Help for information on upgrading.
2. Plug a compatible DCIM-USB into the USB and video ports on the
Paragon II user station.
If the system is a two- or three-tier system, ensure the Paragon II
user station is connected to the base KX III device (first tier).
3. Connect the Paragon II user station to a KX III device via a Cat5
UTP cable up to 150 feet (45 m).

Plug one end of the cable to the DCIM's RJ-45 port and the other
end to one of the channel ports on the KX III device.
4. If you want to have more paths to access the same Paragon II
system in KX III or CC-SG, repeat Steps 1 to 3 to connect additional
user stations to the KX III.