Connect To A Target Using The Mobile Kvm Client; Touch Mouse Functions - Raritan dominion kx III Administrator's Manual

Chapter 9: Mobile KVM Client (MKC) Help

Connect to a Target Using the Mobile KVM Client

Touch Mouse Functions

320
Mobile access using the Mobile Access Client requires the use of
CommandCenter Secure Gateway (CC-SG).
Enable pop-ups in your mobile device browser before accessing Mobile
KVM Client (MKC) or CC-SG Mobile Access Client.
MKC does not support connections over IPv6.
To connect to a target via KX III on a mobile device:
1. Login to the Access Client using your mobile device browser.
2. Touch the node you want to access in the node list, then touch the
blue interface link in the Node Profile to the right.
3. The Mobile KVM Client opens and connects to the target.
Use the touchscreen equivalent for each mouse function to navigate the
Mobile KVM Client (MKC) on your mobile device.
To view this chart in MKC, touch the Help icon (?) in the MKC toolbar.
Single Finger Touch
touch down - move - release
short tap
double short tap
short tap - touch down - move -
release
Two Finger Touch
touch down - move - release
touch down - change distance -
release
short tap
double short tap
short tap - touch down - move -
release
Mouse Equivalent
move mouse pointer
left click
left double-click
hold down left mouse button and
move, as in drag and drop or
select
Mouse Equivalent
move screen
resize screen (short pause at
100% zoom)
right click
right double-click
hold down right mouse button and
move, as in right drag and drop