Stopping Cc-Sg Management - Raritan Dominion KX II User Manual

Stopping CC-SG Management

While the KX II is under CC-SG management, if you try to access the
device directly, you are notified that it the device is under CC-SG
management.
If you are managing the KX II through CC-SG and connectivity between
CC-SG and the KX II is lost after the specified timeout interval (typically
10 minutes), you are able to end the CC-SG management session from
the KX II console.
Note: You must have the appropriate permissions to end CC-SG
management of the KX II. Additionally, the Stop CC-SG Management
option will not be provided unless you are currently using CC-SG to
manage the KX II.
To stop CC-SG management of the KX II:
1. Click Maintenance > Stop CC-SG Management. A message
indicating that the device is being managed by CC-SG will be
displayed. An option to remove the device from CC-SG management
will also be displayed.
2. Click Yes to begin the processing of removing the device from CC-
SG management. A confirmation message will then displayed asking
you to confirm that you want the remove the device from CC-SG
management.
Chapter 10: Maintenance
241