Raritan dominion kx III Administrator's Manual page 83

2. Click Delete.
3. When prompted to confirm the deletion, click OK.
Important: ACL rules are evaluated in the order in which they are listed.
For instance, in the example shown here, if the two ACL rules were
reversed, Dominion would accept no communication at all.
Tip: The rule numbers allow you to have more control over the order in
which the rules are created.
Modifying an Existing User Group
Note: All permissions are enabled for the Admin group and cannot be
changed.
To modify an existing user group:
1. From the Group page, change the appropriate fields and set the
appropriate permissions.
2. Set the Permissions for the group. Select the checkboxes before the
permissions you want to assign to all of the users belonging to this
group. See Setting Permissions
3. Set the Port Permissions. Specify the server ports that can be
accessed by users belonging to this group (and the type of access).
See Setting Port Permissions
4. Set the IP ACL (optional). This feature limits access to the KX III
device by specifying IP addresses. See
(Access Control List)
5. Click OK.
To delete a user group:
Important: If you delete a group with users in it, the users are
automatically assigned to the <unknown> user group.
Tip: To determine the users belonging to a particular group, sort the User
List by User Group.
1. Choose a group from among those listed by checking the checkbox
to the left of the Group Name.
Chapter 4: KX III Administration
(on page 66).
(on page 68).
Group-Based IP ACL
(on page 69).
71