Logging In To Kx Iii - Raritan dominion kx III Administrator's Manual

Logging In to KX III

Log in to your KX III Remote Console from any workstation with network
™
connectivity. Java 1.7 is required to use the Java-based Virtual KVM
Client (VKC). Java 1.8.0_40 is required to use the VKCS. VKCs requires
Java 1.8.0_40 or later. Alternatively, Microsoft .NET
required to use KX III with the Microsoft Windows
Client (AKC).
Logging in and using KX III requires you to allow pop-ups.
For information on security warnings and validation messages, and steps
to reduce or eliminate them, see
Messages (on page 9).
If using a Dominion User Station, you must add the KX III switches you
intend to access, including user credentials (login/password), on the
User Station for KX III authentication.
To log in to the KX III via Remote Console:
1. Launch a supported web browser.
2. Enter the URL that corresponds to the client you want to use:

http://IP-ADDRESS launches the Active KVM Client from
supported Microsoft .Net based environments or launches the
Virtual KVM Client
Or

http://IP-ADDRESS/vkc for the Java-based Virtual KVM Client
Or

http://IP-ADDRESS/vkcs for the standalone Java-based Virtual
KVM Client for Chrome browsers
Or

http://IP-ADDRESS/admin for an administration-only client
without target access capability. This client does not
require .NET or Java.
IP-ADDRESS is the IP address assigned to your KX III
You can also use HTTPS, or the DNS name of the KX III assigned by
your administrator (if applicable).
You are always redirected to the IP address from HTTP to HTTPS.
3. Enter your username and password, then click Login.
4. Accept the user agreement (if applicable).
5. If security warnings appear, click to accept.
Chapter 2: Get Started Using KX III
® 4.0 (or later) is
®
-based Active KVM
Security Warnings and Validation
17