Step 3: Connecting The Equipment - Raritan dominion kx III Administrator's Manual

Chapter 4: KX III Administration
36
5. Select 'Mac OS-X (10.4.9) and later' from the Available box, then
click Add to add it to the Selected box.
6. Click on 'Mac OS-X (10.4.9) and later' in the Selected box. This
automatically adds it to the Preferred Profile drop-down.
7. Select 'Mac OS-X (10.4.9) and later' from the Preferred Profile
drop-down, then check the checkbox under 'Set Active Profile As
Preferred Profile'.

Click OK to apply.
Linux Mouse Settings
Configure these Linux

(Standard Mouse Mode only) Set the mouse acceleration to exactly
1 and set the threshold to exactly 1. Enter the following command:
xset mouse 1 1. This should be set for execution upon login.
Sun Solaris Mouse Settings
Configure these Sun

Set the mouse acceleration value to exactly 1 and the threshold to
exactly 1

Ensure that your video card is set to a supported resolution and that
its output is VGA, not composite sync
IBM AIX Mouse Settings
Configure these IBM AIX

Go to the Style Manager, click on Mouse Settings and set Mouse
Acceleration to 1.0 and Threshold to 3.0

Step 3: Connecting the Equipment

®
mouse settings:
® Solaris ™ mouse settings:
® mouse settings: