Dual Mouse Modes - Raritan dominion kx III Administrator's Manual

Dual Mouse Modes

Absolute Mouse Synchronization
In this mode, absolute coordinates are used to keep the client and target
cursors in synch, even when the target mouse is set to a different
acceleration or speed.
This mode is supported on servers with USB ports and is the default
mode for virtual media CIMs.
Absolute Mouse Synchronization requires the use of a virtual media CIM
-

D2CIM-VUSB

D2CIM-DVUSB

D2CIM-DVUSB-DVI

D2CIM-DVUSB-HDMI

D2CIM-DVUSB-DP
To enter Absolute Mouse Synchronization:

Choose Mouse > Absolute from the KVM client.
The black USB connector on the DVUSB CIMs are used for the
keyboard and mouse. The gray connector is used for virtual media.
Keep both USB plugs of the CIM connected to the device.
The device may not operate properly if both plugs are not connected to
the target server.
Intelligent Mouse Mode
In Intelligent Mouse mode, the device can detect the target mouse
settings and synchronize the mouse cursors accordingly, allowing mouse
acceleration on the target. Intelligent mouse mode is the default for
non-VM targets.
Enter Intelligent Mouse Mode
To enter intelligent mouse mode:

Choose Mouse > Intelligent.
Chapter 7: Virtual KVM Client (VKC and VKCs) Help
289