Direct Port Access And Dual Port Video Groups; Updating The Ldap Schema - Raritan dominion kx III Administrator's Manual

Chapter 4: KX III Administration

Direct Port Access and Dual Port Video Groups

Direct Port Access allows users to bypass having to use the KX III's
Login dialog and Port Access page.
This feature also provides the ability to enter a username and password
directly to proceed to the target, if the username and password is not
contained in the URL.
If you are accessing a target that is part of a dual port video group, direct
port access uses the primary port to launch both the primary and
secondary ports.
Direct port connections to the secondary port are denied, and usual
permission rules apply.
For information on the dual port video group feature, see Creating a
Dual Video Port Group (on page 190).
For information on direct port access, see Enabling Direct Port Access
via URL (on page 153).
Dual Port Video Groups Displayed on the Ports Page
Note: The dual video primary port is defined when the port group is
created.
Note: You cannot remotely connect to the dual video port group by
clicking on a primary port unless two KVM channels are available. If two
channels are not available, the Connect link is not displayed.
For dual video port groups, the primary port is included in a port scan,
but the secondary port is not included when connecting from a remote
client. Both ports can be included in the scan from the Local Port.
See Working with Target Servers for more information on what is
displayed on the Ports page, and see Scanning Ports (see "Scanning
Ports - Remote Console" on page 330) for information on performing
scans.

Updating the LDAP Schema

Returning User Group Information
Use the information in this section to return User Group information (and
assist with authorization) once authentication is successful.
249