Virtual Media Connection Failures Using High Speed For Virtual Media Connections; Usb Port And Profile Notes - Raritan dominion kx III Administrator's Manual

Appendix E: Informational Notes
2. Restart the target.
Virtual Media Connection Failures Using High Speed for Virtual
Media Connections
Under certain circumstances it may be necessary to select the "Use Full
Speed for Virtual Media CIM" when a target has problems with "High
Speed USB" connections or when the target is experiencing USB
protocol errors caused by signal degradation due to additional
connectors and cables (for example, a connection to a blade server via a
dongle).

USB Port and Profile Notes

VM-CIMs and DL360 USB Ports
®
HP DL360 servers have one USB port on the back of the device and
another on the front of the device. With the DL360, both ports cannot be
used at the same time. Therefore, a dual VM-CIM cannot be used on
DL360 servers.
However, as a workaround, a USB2 hub can be attached to the USB port
on the back of the device and a dual VM-CIM can be attached to the
hub.
Help Choosing USB Profiles
When you are connected to a KVM target server via the Virtual KVM
Client (VKC), you can view information about USB profiles via the Help
on USB Profiles command on the USB Profile menu.
407