Raritan dominion kx III Administrator's Manual page 406

Appendix D: Specifications
Port
HTTPS, Port 443
KX III (Raritan
KVM-over-IP)
Protocol,
Configurable Port
5000
SNTP (Time Server)
on Configurable
UDP Port 123
LDAP/LDAPS on
Configurable Ports
389 or 636
RADIUS on
Configurable Port
1812
RADIUS Accounting
on Configurable Port
1813
SYSLOG on
Configurable UDP
Port 514
SNMP Default UDP
Ports
TCP Port 22
SSH
394
Description
This port can be configured as needed. See
Settings (on page 148).
By default, this port is used for multiple purposes, including the web
server for the HTML client, the download of client software (Virtual KVM
Client (VKC)) onto the client's host, and the transfer of KVM and virtual
media data streams to the client.
This port is used to discover other Dominion devices and for
communication between Raritan devices and systems, including
CC-SG for devices that CC-SG management is available.
By default, this is set to Port 5000, but you may configure it to use any
TCP port not currently in use. For details on how to configure this
setting, see Network Settings
The KX III offers the optional capability to synchronize its internal clock
to a central time server.
This function requires the use of UDP Port 123 (the standard for
SNTP), but can also be configured to use any port of your designation.
Optional
If the KX III is configured to remotely authenticate user logins via the
LDAP/LDAPS protocol, ports 389 or 636 will be used, but the system
can also be configured to use any port of your designation. Optional
If the KX III is configured to remotely authenticate user logins via the
RADIUS protocol, either port 1812 will be used, but the system can also
be configured to use any port of your designation. Optional
If the KX III is configured to remotely authenticate user logins via the
RADIUS protocol, and also employs RADIUS accounting for event
logging, port 1813 or an additional port of your designation will be used
to transfer log notifications.
If the KX III is configured to send messages to a Syslog server, then the
indicated port(s) will be used for communication - uses UDP Port 514.
Port 161 is used for inbound/outbound read/write SNMP access and
port 162 is used for outbound traffic for SNMP traps. Optional
Port 22 is used for the KX III command line interface (when you are
working with Raritan Technical Support).
(Secure Shell) SSH port can be configured. The default is port 22.
HTTP and HTTPS Port
(on page 90).