Raritan dominion kx III Administrator's Manual page 56

Chapter 4: KX III Administration
44
9. Enter the LAN2 IPv4 Default Gateway and Subnet Mask.
10. Complete the IPv6 sections, if applicable.
11. Select the IP Auto Configuration.
If None is selected, you must manually specify -
 Global/Unique IP Address - this is the IP address assigned to
KX III.
 Prefix Length - this is the number of bits used in the IPv6
address.
 Gateway IP Address.
Select Router Discovery to locate a Global or Unique IPv6 address
instead of a Link-Local subnet. Once located, the address is
automatically applied.
Note that the following additional, read-only information appears in
this section -

Link-Local IP Address - this address is automatically assigned to
the device. It is used for neighbor discovery or when no routers
are present.

Zone ID - Identifies the device the address is associated with.
Read-Only