Rack Pdu (Power Strip) Outlet Control; Overview - Raritan dominion kx III Administrator's Manual

Chapter 4: KX III Administration

Rack PDU (Power Strip) Outlet Control

54

Overview

You can control Raritan PX and RPC series rack PDU (power strip)
outlets connected to the KX III through a D2CIM-PWR.
Once connected to the KX III, the rack PDU and its outlets are controlled
from the Powerstrip page, which is accessed by clicking on the Power
menu at the top of the page.
Note: If no powerstrips are connected to KX III, a message stating "No
powerstrips found" is displayed in the Powerstrip Device section of page.
All of the powerstrips you have permissions to access and which are
connected to KX III are listed in the Powerstrip drop-down.
Information about the currently selected powerstrip is displayed under
the Powerstrip drop-down.

Name

Model

Temperature

Current Amps

Maximum Amps

Voltage

Power in Watts

Power in Volts Ampere

Outlet Display Information:

Name - Named assigned to the outlet when it was configured.

State - On or Off status of the outlet

Control - Turn outlets on or off, or cycle their power

Association - The target ports associated with the outlet
In the case of tiered configurations, the Powerstrip page will display both
rack PDUs attached to the base and tiered KX IIIs, for which the user
has been granted appropriate port access permissions.

Outlet Display Information:

Name - Named assigned to the outlet when it was configured.

State - On or Off status of the outlet

Control - Turn outlets on or off, or cycle their power