Raritan dominion kx III Administrator's Manual page 133

Chapter 4: KX III Administration
Hot Key Sequences to Access Blade Chassis
The use of hot key sequences to switch KVM access to a blade chassis
is supported.
For blade chassis that allow users to select a hot key sequence, those
options will be provided on the Port Configuration page.
For example, the Dell PowerEdge M1000e allows users to select from a
list of default hot key sequences.
The hot key sequences specific to the M1000e are listed in the "Switch
Hot Key Sequence" drop-down when the M1000e is selected.
For blade chassis that come with predefined hot key sequences, those
sequences will be prepopulated on the Port Configuration page once the
blade chassis is selected.
For example, the default hot key sequence to switch KVM access to an
IBM BladeCenter H is NumLock + NumLock + SlotNumber.
This hot key sequence is applied by default when IBM BladeCenter H is
selected during the configuration.
See your blade chassis documentation for hot key sequence information.
121