Raritan dominion kx III Administrator's Manual page 131

14. Select 'Use international keyboard for scan code set 3' if connecting
to the target with a DCIM-PS2 and require the use of scan code set 3
with an international keyboard.
15. Click OK to save the configuration.
Blade Chassis Configuration Options
With the exception of HP and Cisco
® ®
IBM and Dell blade chassis are configured on the Port page.
The port connected to the blade chassis must be configured with the
blade chassis model.
The specific information you are able to configure for a blade server will
depend on the brand of blade server you are working with. For specific
information on each of these supported blade chassis, see their
corresponding topics in this section of the help.
Dell

®
Dell PowerEdge 1855, 1955 and M1000e
Dell PowerEdge 1855/1955 blades also provide the ability to connect
from each individual blade to a port on the Dominion appliance.
When connected in that manner, they can also be grouped to create
blade server groups.
IBM

®
IBM BladeCenter
Generic

A Generic option allows you to configure a blade chassis that is not a
Dell PowerEdge ® 1855, 1955 and M1000e, IBM BladeCenter
Models E and H, HP BladeSystem c3000 and c7000, or Cisco UCS
blade server.
HP

HP BladeSystem c3000 and c7000, and Cisco UCS blade servers
are supported via individual connections from the Dominion
appliance to each blade.
The ports are 'grouped' together into a chassis representation using
the Port Group Management feature.
®
UCS blade chassis, the generic,
Models E and H
Chapter 4: KX III Administration
®
119