Raritan dominion kx III Administrator's Manual page 324

Chapter 7: Virtual KVM Client (VKC and VKCs) Help
312
6. Select the audio format for the playback device from the Format:
drop-down.
Note: Select the format that you wish to use based on the available
network bandwidth. Formats with lower sampling rates consume less
bandwidth and may tolerate more network congestion.
7. Select the "Mount selected playback device automatically on
connection to target" checkbox to automatically connect an audio
playback device when you connect to an audio supporting target.
8. Check Connect Recording Device if you are connecting a recording
device.
Note: The device names listed in the Connect Recording Device
drop-down are truncated to a maximum of 30 characters for Java
clients.
9. Select the device that you wish to connect from the drop-down list.
10. Select the audio format for the recording device from the Format:
drop-down.
11. Click OK. If the audio connection is established, a confirmation
message appears. Click OK.
If the connection was not established, an error message appears.
Once an audio connection is established, the Audio menu changes to
Disconnect Audio. The settings for the audio device are saved and
applied to subsequent connections to the audio device.
A Speaker icon
the client window. It is grayed out when no audio is being used.
When the Speaker icon and Microphone icon
the status bar, the session is being captured as it is streamed.
Disconnect from an Audio Device
To disconnect from the audio device:

Click the Audio icon
prompted to confirm the disconnect. A confirmation message
appears. Click OK.
is displayed in the status bar at the bottom of
in the toolbar and select OK when you are
are displayed in