7. The LAN1 settings are applied to LAN2 if failover occurs.
8. Complete the IPv6 sections, if applicable.
9. Select the IP Auto Configuration.
If None is selected, you must manually specify -
Global/Unique IP Address - this is the IP address assigned to
KX III.
Prefix Length - this is the number of bits used in the IPv6
address.
Gateway IP Address.
Select Router Discovery to locate a Global or Unique IPv6 address
instead of a Link-Local subnet. Once located, the address is
automatically applied.
Note that the following additional, read-only information appears in
this section -
Chapter 4: KX III Administration
91