Scanning Ports - Local Console - Raritan dominion kx III Administrator's Manual

Chapter 11: KX III Local Console

Scanning Ports - Local Console

Use the port scanning feature to search for selected targets and display
them in individual thumbnails as part of a slide show.
This feature allows you to monitor up to 32 targets at one time since you
can view each target server individually as it is displayed during the slide
show.
Connect to targets or focus on a specific target as needed.
Scans can include standard targets, blade servers, tiered Dominion
devices, and KVM switch ports.
For dual video port groups, the primary port is included in a port scan,
but the secondary port is not included when connecting from a remote
client. Both ports can be included in the scan from the Local Port.
Click on the thumbnail of any target server to exit scan mode and
connect to the target, or use the Local Port ConnectKey sequence.
To exit scan mode, click the Stop Scan button in the thumbnail view, or
use the DisconnectKey sequence hot key.
Note: The scan port feature is available from the Remote Console and
Local Console, but the feature varies slightly. See Scanning Ports -
Remote Console (on page 330)
345