Raritan dominion kx III Administrator's Manual page 135

Managing Blade Chassis
Blade chassis can be managed from the Virtual KVM Client (VKC),
Active KVM Client (AKC), and CC-SG.
Managing blade severs via VKC and AKC is the same as managing
standard target servers.
See Virtual KVM Client (VKC) Help
and VKCs) Help" on page 270),
page 266) and the CC-SG Administrators Guide for more information.
Note: Any changes made to the blade chassis configuration will be
propagated to these client applications.
Important: When the CIM connecting the blade chassis to the Dominion
appliance is powered down or disconnected from the Dominion device,
all established connections to the blade chassis are dropped. When the
CIM is reconnected or powered up, you need to re-establish the
connection(s).
Dell Blade Chassis Configuration
See Supported Blade Chassis Models
CIMs for Blade Chassis
Recommended Blade Chassis Configurations
important, additional information when configuring the blade chassis.
See Dell Chassis Cable Lengths and Video Resolutions
385) for information on cable lengths and video resolutions when using
Dell ® chassis with the KX III.
To add a blade chassis:
1. Connect the blade chassis to the KX III.
2. Select Device Settings > Port Configuration to open the Port
Configuration page.
3. On the Port Configuration page, click on the name of the blade
chassis you want to configure. The Port page will open.
4. Select the Blade Chassis radio button. The page will then display the
necessary fields to configure a blade chassis.
5. Select the Dell blade chassis model from the Blade Server Chassis
Model drop-down.
Chapter 4: KX III Administration
(see "Virtual KVM Client (VKC
Active KVM Client (AKC) Help
(on page 135),
(on page 135), and Required and
(on
Supported
(on page 138) for
(on page
123