Raritan dominion kx III Administrator's Manual page 127

3. On the Port Configuration page, click on the name of the blade
chassis you want to configure. The Port page will open.
4. Select the Blade Chassis radio button.
The page will then display the necessary fields to configure a blade
chassis.
5. Select Generic from the Blade Server Chassis Model drop-down.
6. Configure the blade chassis as applicable.

Switch Hot Key Sequence - Define the hot key sequence that will
be used to switch from KVM to the blade chassis.
The Switch Hot Key Sequence must match the sequence used
by the KVM module in the blade chassis.

Maximum Number of Slots - Enter the default maximum number
of slots available on the blade chassis.

Administrative Module Primary IP Address/Host Name - Not
applicable.
Chapter 4: KX III Administration
115