Raritan dominion kx III Administrator's Manual page 303

Standard Mouse Mode
Standard Mouse mode uses a standard mouse synchronization
algorithm. The algorithm determines relative mouse positions on the
client and target server.
In order for the client and target mouse cursors to stay in synch, mouse
acceleration must be disabled. Additionally, specific mouse parameters
must be set correctly.
To enter Standard Mouse mode:

Choose Mouse > Standard.
Mouse Synchronization Tips
If you have an issue with mouse synchronization:
1. Verify that the selected video resolution and refresh rate are among
those supported by the device. The KVM Client Connection Info
dialog displays the actual values that the device is seeing.
2. Force an auto-sense by clicking the KVM Client auto-sense button.
3. If that does not improve the mouse synchronization (for Linux, UNIX,
and Solaris KVM target servers):
a. Open a terminal window.
b. Enter the following command: xset mouse 1 1
c. Close the terminal window.
4. Click the "KVM Client mouse synchronization" button
Synchronize Your Mouse
In dual mouse mode, the Synchronize Mouse command forces
realignment of the target server mouse cursor with the client mouse
cursor.
To synchronize the mouse cursors, do one of the following:

Click the Synchronize Mouse button
or select Mouse > Synchronize Mouse from the menu bar.
Note: This option is available only in Standard and Intelligent mouse
modes.
Chapter 7: Virtual KVM Client (VKC and VKCs) Help
in the KVM client toolbar,
.
291