Raritan dominion kx III Administrator's Manual page 191

2. Click the 'Click here to view the 'SNMP MIB' link. The MIB file opens
in a browser window.
SysLog Configuration
1. Choose Device Settings > Event Management - Settings. The Event
Management - Settings page opens.
2. Select Enable Syslog Forwarding to log the appliance's messages to
a remote Syslog server.
3. Type the IP Address/Hostname of your Syslog server in the IP
Address field.
4. Click OK.
Note: IPv6 addresses cannot exceed 80 characters in length for the host
name.

Click Reset to Defaults at the bottom of the page to remove the
setting.
Configuring Event Management - Destinations
If system events are enabled, SNMP notification events (traps) are
generated. The events can be logged to the syslog or audit log.
Events and where the event information is sent is configured on the
Event Management - Destinations page.
Note: SNMP, Syslog, and SMTP logging only works when enabled in the
Event Management - Settings page.
To select events and their destinations:
1. Choose Device Settings > Event Management - Destinations. The
Event Management - Destinations page opens.
System events are categorized by Device Operation, Device
Management, Security, User Activity, and User Group Administration.
2. Select the checkboxes for those event line items you want to enable
or disable, and where you want to send the information.
Tip: Enable or disable entire categories by checking or clearing the
Category checkboxes, respectively.
3. Click OK.
Chapter 4: KX III Administration
179