Sync Mouse in Intelligent or Standard Mouse Mode
Auto-Sense Video Settings
Set Video Connection Quality
In Intelligent or Standard mouse mode, the Sync Mouse command forces
realignment of the target server mouse pointer with the MKC mouse
pointer.
To sync mouse:
1. In the MKC toolbar, touch Menu, then touch Mouse.
2. Touch Sync Mouse. Wait several seconds while the synchronization
occurs.
The Auto-sense Video Settings command forces a re-sensing of the
video settings (resolution, refresh rate) and redraws the video screen.
Auto-sensing video settings can eliminate target video misalignment and
sometimes mouse synchronization problems.
To auto-sense video settings:
1. In the MKC toolbar, touch Menu, then touch Video.
2. Touch Auto Sense Video Settings.
Adjust the bandwidth consumed by the connection by setting the video
connection quality. A lower quality setting will consume less bandwidth
by providing lower video quality.
Use the connection information display to get bandwidth information to
help adjust the video connection quality. See
(on page 323).
To set video connection quality:
1. In the MKC toolbar, touch Menu, then touch Video.
2. Touch Connection Quality Settings, then touch High, Medium, or
Low. The default setting is High.
Chapter 9: Mobile KVM Client (MKC) Help
Display Connection Info
327