Raritan dominion kx III Administrator's Manual page 151

Blade chassis Required/recommended action
 Do not designate any slots for scan operations in the iKVM GUI
 Do not designate any slots for broadcast keyboard/mouse
 Designate a single key sequence to invoke the iKVM GUI. This
 Ensure that Front Panel USB/Video Enabled is not selected
 Ensure that 'Allow access to CMC CLI from iKVM' is not
 To avoid having the iKVM GUI display upon connecting to the
 Recommend that 'Timed' and 'Displayed' be selected during
 Disable the iKVM GUI screensaver. An Authorize dialog will
Dell PowerEdge
1855/1955
 Exit the iKVM GUI menu before attaching Dell's chassis to a
 Configure the iKVM GUI Main menu to select target blades by
 Do not designate any slots for scan operations in the iKVM GUI
 To avoid having the iKVM GUI display upon connecting to the
 Recommend that 'Timed' and 'Displayed' be selected during
done.
Setup Scan menu. iKVM may not work correctly otherwise.
operations in the iKVM GUI Setup Broadcast menu. iKVM may
not work correctly otherwise.
key sequence must also be identified during KX III port
configuration. Otherwise, indiscriminate iKVM operation may
occur as a result of client key entry.
during iKVM configuration via the Dell CMC GUI. Otherwise,
connections made at the front of chassis will take precedence
over the KX III connection at the rear, preventing proper iKVM
operation. A message will be displayed stating 'User has been
disabled as front panel is currently active.'
selected during iKVM configuration via the Dell CMC GUI.
blade chassis, set the Screen Delay Time to 8 seconds.
iKVM GUI Flag Setup. This will allow you to visually confirm the
connection to the desired blade slot.
appear if this is not done and will prevent the iKVM from
operating correctly.
Raritan CIM. iKVM may not work correctly if this is not done.
Slot, not by Name. iKVM may not work correctly if this is not
done.
Setup Scan menu or the iKVM may not work properly.
blade chassis, set the Screen Delay Time to 8 seconds.
iKVM GUI Flag Setup. This will allow you to visually confirm
the connection to the desired blade slot.
Chapter 4: KX III Administration
139