Raritan dominion kx III Administrator's Manual page 132

Chapter 4: KX III Administration
120
Manual and Auto-Discovery Blade Chassis Configuration
Two modes of operation are provided for blade chassis: manual
configuration and auto-discovery, depending on the blade chassis
capabilities.
Configure the mode by selecting Device Services > Port Configuration to
open the Port page. Options are available in the "Blade Server Chassis
Port Configuration" section of the page.
If a blade chassis is configured for auto-discovery, the Dominion
appliance tracks and updates the following:

When a new blade server is added to the chassis.

When an existing blade server is removed from the chassis.
Note: In the case of IBM Blade Center Models E and H, the KX III only
supports auto-discovery for AMM[1] as the acting primary management
module.
Select the "Blade Auto-Discovery" checkbox to enable auto-discovery.
To locate a blade at this time, click the "Discover Blades in Chassis Now"
button.