Upgrade History - Raritan dominion kx III Administrator's Manual

Note: At this point, connected users are logged out, and new login
attempts are blocked.
6. Click Upgrade. Please wait for the upgrade to complete. Status
information and progress bars are displayed during the upgrade.
Upon completion of the upgrade, the appliance reboots (1 beep
sounds to signal that the reboot has completed).
7. As prompted, close the browser and wait approximately 5 minutes
before logging in to the KX III again.

Upgrade History

The KX III provides information about upgrades performed on the KX III
and attached CIMS.
To view the upgrade history:

Choose Maintenance > Upgrade History. The Upgrade History page
opens.
Information is provided about the KX III upgrade(s) that have been run,
the final status of the upgrade, the start and end times, and the previous
and current firmware versions. Information is also provided about the
CIMS, which can be obtained by clicking the show link for an upgrade.
The CIM information provided is:

Type - The type of CIM

Port - The port where the CIM is connected

User - The user who performed the upgrade

IP - IP address firmware location

Start Time - Start time of the upgrade

End Time - end time of the upgrade

Previous Version - Previous CIM firmware version

Upgrade Version - Current CIM firmware version

CIMs - Upgraded CIMs

Result - The result of the upgrade (success or fail)
Rebooting the KX III
The Reboot page provides a safe and controlled way to reboot your KX
III. This is the recommended method for rebooting.
Important: All connections will be closed and all users will be logged off.
Chapter 4: KX III Administration
219