Target Status Indicators During Port Scanning - Local Console - Raritan dominion kx III Administrator's Manual

Chapter 11: KX III Local Console
348

Target Status Indicators During Port Scanning - Local Console

In thumbnail view on the Local Console, the status of each target is
indicated below the thumbnail on the page until it is the focus of the slide
show view.
The scanning status of each target is displayed as:

not scanned

connecting

scanned

skipped
Configure Local Console Scan Settings
Do the following to configure Local Console scan port options.
Note: Configure scan settings for the Remote Console from VKC, VKCS,
or AKC. See Configuring Port Scan Settings in VKC/VKCS and AKC
(on page 297)
To configure the Local Console scan port settings:
1. On the Local Console, select Device Settings.
2. In the Local Port Settings section, select Local Port Scan Mode.
3. Change the display interval as needed: